What You'll Learn
Aussie Conditions
Look, I love a drop-top as much as the next bloke, but in Australia, owning one is a full-time commitment. Between the UV rays that'll bleach your fabric in a single summer and the local fruit bats using your roof as a target, you've got to stay on top of it. This guide is for anyone who wants to stop their soft top from leaking or looking like it's been left in the Simpson Desert for a decade.
The Reality of Soft Tops in Australia
What You'll Need (The Non-Negotiables)
What You'll Need
While you're here...
Setting the Stage
The Initial De-Dusting
Give the roof a good vacuum using the soft brush attachment. I learned this the hard way when I started, if you wet a dusty roof, you're just making mud that gets pushed deeper into the fabric. Get the loose stuff off first.
The Rinse
Give the whole car a gentle wash. Use a low-pressure hose to wet the roof down. No pressure washers here, mate, you'll blow the seals or tear the stitching if you're not careful.
Masking Up
If you're planning to seal the roof (which you should be), tape off the rubber seals and the glass. It's a pain in the arse to get sealant off glass once it dries.
The Clean and Protect Process
Apply the Cleaner
Spray your dedicated cleaner evenly across the wet roof. Work in sections, I usually do half the roof at a time so it doesn't dry out while I'm faffing around.
Agitate Gently
Use your horsehair brush in circular motions. You'll see a bit of a lather forming. Don't scrub like you're trying to get a stain out of the carpet; just enough to lift the grime.
Focus on the Folds
Give a bit of extra attention to the areas where the roof folds. That's where the mould and green moss love to grow, especially if you park under trees.
Rinse Thoroughly
Rinse until the water runs clear. If you leave soap in there, it'll attract dirt like a magnet once it's dry. Some people reckon one rinse is enough, but I usually do it twice just to be sure.
The Drying Game
Now, this is the boring part. You've got to let it dry completely. And I mean bone dry. I usually leave it for a few hours in the garage or a shady spot. If you apply sealant to a damp roof, it won't bond, and you've wasted your Saturday.
Final Masking
Before the sealant goes on, cover the rest of the car with plastic sheets. Even a slight breeze will carry that over-spray onto your nice clean paint. (Made this mistake myself on a black Commodore, took me hours to buff the spots off).
Apply Protection
Spray your fabric protector in even, overlapping strokes. Don't soak it, but make sure you haven't missed a spot. Two light coats are always better than one heavy one.
Wipe the Excess
If any gets on the trim or glass, wipe it off immediately with a fresh microfibre. It's much easier to do now than tomorrow morning.
The Cure
Let it cure. Most products need 12-24 hours before they get wet. Keep it in the garage or under the carport. No beach trips tonight, sorry.
Watch Out
Dealing with Bat Droppings
The Lint Roller Trick
Maintaining the Look
Common Questions from the Garage
Can I use a pressure washer on my soft top?
How do I clean the plastic rear window?
My roof is turning green, what do I do?
Is there a difference between vinyl and fabric tops?
Trusted by 50,000+ Aussie car owners
Professional advice for Australian conditions
Products We Recommend
Keep Learning
Ready to level up your car care?
You've got the knowledge—now put it into action. Explore more guides or check out our recommended products.
Get Weekly Car Care Tips
Join 12,000+ Aussie car enthusiasts
Keep Reading
Keeping Your Ragtop Right: The Real Way to Clean and Protect Soft Tops
Soft tops take a beating in the Aussie sun, from brutal UV rays to bat droppings that eat through fabric. This guide shows you how to deep clean, waterproof, and protect your convertible so it doesn't end up looking like a faded grey rag.
How to Look After Matte Paint Without Ruining It
Matte and satin finishes look incredible but they're a nightmare if you treat them like a normal car. This is how you wash and protect that flat finish without accidentally turning it shiny.
Keeping Your Bike Mint in the Aussie Sun
Detailing a bike is a different beast compared to a car, there's way more nooks and crannies to hide salt and red dust. Here is how to protect your ride from the harsh Autumn UV and coastal corrosion without spending all day on it.
Making Your Exhaust Tips Shine Again (Mar 2026)
Dull, blackened exhaust tips ruin a good detail. Here is the gear and the process I use to get them back to a mirror finish without scratching the metal.

