Trusted by 50,000+ Aussie drivers
Maintenance Basics beginner 7 min read

Restoring Your Console and Interior Trim the Right Way

Most car owners make this harder than it needs to be. Here's the straightforward approach that actually works—no fluff, no upselling.

Is your interior looking a bit tired after a long summer? Learn how to deep clean and restore sun-faded consoles and dusty trim to get that factory finish back.

MT
Mick Thompson Senior Detailing Editor
| Updated: 4 March 2026
Restoring Your Console and Interior Trim the Right Way

Aussie Conditions

Australian conditions are tougher than most—intense UV, red dust, coastal salt, and 40°C summers. European car care advice often doesn't cut it here.
Quick Summary

Look, we've all been there. You spend all weekend washing the outside of the rig, but then you jump in and the dash is covered in red dust and the centre console is looking chalky from the sun. This guide is for anyone who wants to bring their interior back to life without that greasy, cheap-looking shine. I'll walk you through how to treat Aussie-spec interiors that have been cooked by the UV and hammered by dust.

01

Why Your Trim Needs Love Right Now

Living in Australia, our car interiors take an absolute beating. By the time March rolls around, your plastic trim has usually spent three months baking in 40-degree heat. I've seen countless dashboards in my time that have literally started to 'bleed' their plasticisers, leaving that sticky, nasty residue. It's not just the heat, either. If you've been out west or up north, that fine red dust gets into every grain of the plastic. Most people just wipe it with a damp rag and wonder why it looks grey and dull ten minutes later. Truth is, you've gotta deep clean that grain before you even think about adding protection. I learned this the hard way years ago on a black Commodore I was prepping for a show, I just slapped some 'shine' on it and the dust actually bonded to the plastic. Never again. We're going to do it properly so it lasts.
02

The Gear You'll Actually Need

What You'll Need

0/8
Interior APC (All Purpose Cleaner) — Something like Bowden's Own 'Agent Orange' or Meguiar's Interior Detailer is perfect.
Boar's Hair Brushes — Essential for getting dust out of the vents and seams. Don't go cheap here.
Magic Eraser (Use with caution!) — Only for the really nasty scuffs on hard plastics. Keep it away from leather.
Microfibre Cloths — Get a pack of at least 5. You'll go through them quickly.
A Matte or Satin Protectant — I reckon 303 Aerospace Protectant is the gold standard for Aussie UV.
Vacuum with Brush Attachment — To suck up the loose grit before you start wetting things down.
Isopropyl Alcohol (Diluted) — Good for removing old, greasy dressings someone else might have used.
Soft Toothbrush — Perfect for cleaning the grit out of the gear stick gaiter and cup holders.
03

Preparation is Everything

Tap each step to mark complete
01

Clear the Clutter

Chuck all the old servo receipts, loose change, and Maccas bags in the bin. You can't restore a console if you're working around junk.

02

The Big Vac

Vacuum everything. Use the brush head so you don't scratch the clear plastic on the dash. Get deep into those side pockets where the dust settles.

03

Blow it Out

If you've got a compressor or even a can of air, blow out the buttons and switches. You'd be amazed at how much dust hides under the window switches.

04

The Restoration Process

Tap each step to mark complete
01

Dry Brushing

Before you spray any liquid, use your soft brush to agitate the dust in the grain of the plastic while holding the vacuum nozzle nearby. This stops the dust turning into mud.

02

Sectioning

Don't just spray the whole car. Work on one area at a time, like the centre console first, then the driver's door card. It keeps things manageable.

03

Apply Cleaner to the Brush

Never spray cleaner directly onto the buttons or screens. Spray it onto your brush or cloth first. I once saw a mate fry a head unit because he sprayed too much 'Armor All' style crap directly into the volume knob.

04

Agitate the Grain

Work the cleaner into the plastic using circular motions with your brush. You'll see the foam turn brown or grey, that's the dirt coming out.

05

The Wipe Down

Use a clean microfibre to wipe away the spent cleaner. Use a fresh side of the cloth for every section.

06

Dealing with Scuffs

For those annoying kick marks on the lower door plastics, use a damp Magic Eraser very lightly. Don't scrub hard or you'll sand away the texture of the plastic.

07

Cup Holder Deep Clean

Cup holders are usually gross. If they have removable rubber inserts, take them out and wash them in the sink with dish soap. If not, use your APC and a toothbrush.

08

Final De-grease

If the plastic still feels sticky from years of cheap silicone dressings, give it a quick wipe with a 10% Isopropyl Alcohol mix. This gives you a 'naked' surface ready for protection.

09

Apply Protection

Apply your UV protectant (like 303) to a microfibre applicator pad, not the dash. Wipe it on evenly. It'll look wet at first, but don't panic.

10

The 'Buff Off'

Wait about 2-5 minutes, then take a clean, dry microfibre and wipe the surface again. This removes the excess and leaves a perfect, factory-look matte finish.

Watch Out

Please, for the love of your car, don't use those cheap, greasy silicone sprays you find at the checkout. They might look shiny for a day, but they actually attract more dust and the silicone can accelerate cracking in the Aussie sun. Plus, the glare off a shiny dash is bloody dangerous when you're driving into the afternoon sun.

The Toothpick Trick

If you've got white polish residue or old dust stuck in the tight seams of the console, wrap a thin microfibre over the end of a toothpick or a plastic trim tool. It's the only way to get that 'detailer' level of clean in the tight gaps.

Watch Out

Modern infotainment screens have delicate anti-glare coatings. Never use window cleaner (with ammonia) or harsh APCs on them. Just a dry, high-quality glass cloth or a very slightly damp one. I've seen a customer ruin the screen on a brand new Ranger by using Dad's old bottle of Windex.

Reviving Grey Plastics

If your black plastics have turned properly grey, a standard dressing might not cut it. You might need a dedicated 'trim restorer' like Solution Finish. It's got a bit of dye in it that actually brings the black back. Just wear gloves, because that stuff stains everything it touches (the missus won't be happy if you get it on the driveway either).
05

Maintaining the Look

Now that it's looking mint, you don't want to have to do this whole process every month. The trick is 'maintenance wiping'. Keep a clean microfibre and a bottle of quick interior detailer in the glovebox. Once a week, just give the main surfaces a quick dust-over. If you've been off-roading and the car is full of dust, don't just wipe it, you'll scratch the plastic. Use the vacuum first every time. Also, try to use a sunshade whenever you're parked up. I know it's a pain, but it's the difference between a dash that lasts 20 years and one that cracks in 5. Honestly, a good sunshade is the best 'detailing product' you can buy in Australia.
06

Common Questions

My dash is sticky, how do I fix it?
If it's 'melting' due to UV damage, you can sometimes clean it with a mild degreaser, but often the plastic is too far gone. A custom-fit dash mat is usually the best bet to cover the mess and stop it getting worse.
Can I use baby wipes for a quick clean?
I wouldn't. Baby wipes contain oils and moisturisers that aren't meant for car plastics and can leave a weird film. Stick to a dedicated interior detailer.
How do I get sunscreen off the armrest?
Sunscreen is the worst. Use a dedicated interior scrub mitt and a good APC. You might have to do it 3 or 4 times to get the white staining out of the grain.
Is 303 Aerospace Protectant really that good?
Yes. It was originally made for aviation and marine use. It's like SPF 40 for your car's interior. It's the only thing I use on my own cars.

Trusted by 50,000+ Aussie car owners

Professional advice for Australian conditions

4.9/5
4,600+ Guides

Products We Recommend

View All →
pH Neutral Snow Foam
Bowden's Own

pH Neutral Snow Foam

$39.95 View
Pressure Washer 2000 PSI
Karcher

Pressure Washer 2000 PSI

$499.00 View
The Rag Company

Microfibre Towels 400GSM (10-Pack)

$39.95 View
Iron Remover / Wheel Cleaner
CarPro

Iron Remover / Wheel Cleaner

$29.95 View

Keep Learning

Ready to level up your car care?

You've got the knowledge—now put it into action. Explore more guides or check out our recommended products.

Get Weekly Car Care Tips

Join 12,000+ Aussie car enthusiasts

Browse All Guides

Keep Reading